User Tools
Sidebar
ac6-refmat:param:chractturnparam
ChrActTurnParam
Fields
| Field | Type | Offset | Description | Notes |
|---|---|---|---|---|
| disableParam_NT | u8 | 0x0 [0] | Exclude from the NT version or mark the ones to be excluded. | This field is a boolean. |
| disableParam_Product | u8 | 0x0 [1] | Exclude from the product version or mark the items to be excluded. | This field is a boolean. |
| disableParamReserve1 | dummy8 | 0x0 [2-7] | This field is padding. | |
| disableParamReserve2 | dummy8 | 0x1 | This field is padding. | |
| baseTurnSpeedDPS | f32 | 0x4 | Standard turning speed for normal turning, the speed and time turning rate are applied to this value. In degrees per second. | |
| speedTurnRate_MinSpeedKMPH | u16 | 0x8 | The minimum turning speed that will be used. In kilometres per hour. | |
| speedTurnRate_MaxSpeedKMPH | u16 | 0xa | The maximum turning speed that will be used. In kilometres per hour. | |
| speedTurnRate_MinSpeedTurnRate | f32 | 0xc | Speed turning rate at minimum speed. | |
| speedTurnRate_MaxSpeedTurnRate | f32 | 0x10 | Speed turning rate at maximum speed. | |
| timeTurnRate_MinTimeSec | f32 | 0x14 | The minimum time turning rate will be reached within this time after the parameter is switched. In seconds. | |
| timeTurnRate_MaxTimeSec | f32 | 0x18 | The maximum time turning rate will be reached within this time after the parameter is switched. In seconds. | |
| timeTurnRate_MinTimeTurnRate | f32 | 0x1c | Time turning rate at minimum time. | |
| timeTurnRate_MaxTimeTurnRate | f32 | 0x20 | Time turning rate at maximum time. | |
| lookTargetModeTurnSpeedDPS | f32 | 0x24 | Turning speed in the mode facing the target direction, reference turning speed is not used. In degrees per second. | |
| lookTargetModeTurnSpeedDPSAtLowDeltaAngle | f32 | 0x28 | Turning speed in the mode facing the target when the angle difference is small, the reference turning speed is not used. In degrees per second. | |
| judgeTurnSpeedThresholdAngleDeg | u16 | 0x2c | If the angle is smaller than this, the low delta angle speed will be used. In degrees. | |
| pad | dummy8 | 0x2e | This field is padding. | |
| lookTargetMode_SpeedTurnRate_MinSpeedKMPH | u16 | 0x30 | The minimum turning speed that will be used. In kilometres per hour. | |
| lookTargetMode_SpeedTurnRate_MaxSpeedKMPH | u16 | 0x32 | The maximum turning speed that will be used. In kilometres per hour. | |
| lookTargetMode_SpeedTurnRate_MinSpeedTurnRate | f32 | 0x34 | Speed turning rate at minimum speed. | |
| lookTargetMode_SpeedTurnRate_MaxSpeedTurnRate | f32 | 0x38 | Speed turning rate at maximum speed. | |
| lookTargetMode_TimeTurnRate_MinTimeSec | f32 | 0x3c | The minimum time turning rate will be reached within this time after the parameter is switched. In seconds. | |
| lookTargetMode_TimeTurnRate_MaxTimeSec | f32 | 0x40 | The maximum time turning rate will be reached within this time after the parameter is switched. In seconds. | |
| lookTargetMode_TimeTurnRate_MinTimeTurnRate | f32 | 0x44 | Time turning rate at minimum time. | |
| lookTargetMode_TimeTurnRate_MaxTimeTurnRate | f32 | 0x48 | Time turning rate at maximum time. | |
| turnAccelDPSS | f32 | 0x4c | Acceleration to reach turning speed. If you want to set the turning speed from the beginning, set a large value. In degrees per second ^ 2 | |
| lookTargetMode_LookAheadSecond | f32 | 0x50 | How many seconds after the target do you try to look when facing the target (for AI). | |
| timeTurnRate_MinTimeSec_Accel | f32 | 0x54 | The minimum time angular acceleration rate is reached within this time after the parameter is switched. In seconds. | |
| timeTurnRate_MaxTimeSec_Accel | f32 | 0x58 | The maximum time angular acceleration rate is reached within this time after the parameter is switched. In seconds. | |
| timeTurnRate_MinTimeTurnAccelRate | f32 | 0x5c | Time angular acceleration rate at minimum time | |
| timeTurnRate_MaxTimeTurnAccelRate | f32 | 0x60 | Time angular acceleration rate at maximum time | |
| lookTargetMode_TimeTurnRate_MinTimeSec_Accel | f32 | 0x64 | The minimum time angular acceleration rate is reached within this time after the parameter is switched. In seconds. | |
| lookTargetMode_TimeTurnRate_MaxTimeSec_Accel | f32 | 0x68 | The maximum time angular acceleration rate is reached within this time after the parameter is switched. In seconds. | |
| lookTargetMode_TimeTurnRate_MinTimeTurnAccelRate | f32 | 0x6c | Time angular acceleration rate at minimum time | |
| lookTargetMode_TimeTurnRate_MaxTimeTurnAccelRate | f32 | 0x70 | Time angular acceleration rate at maximum time | |
| pad_2 | dummy8 | 0x74 | This field is padding. | |
| paramEndIntpTimeSec | f32 | 0x7c | Time to interpolate acceleration when parameters switch and exit. In seconds. | |
| reverseTurnBrakeDPSS | f32 | 0x80 | Brake when turning in the opposite direction (disabled at -1). In degrees per second ^ 2 | |
| animBlendMaxSpeedDPS_LR | f32 | 0x84 | When the angular velocity exceeds this speed, the blend ratio of left and right animation becomes 1. In degrees per second. | |
| pad_end | dummy8 | 0x88 | This field is padding. |
ac6-refmat/param/chractturnparam.txt · Last modified: by admin
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
