User Tools
Sidebar
ac6-refmat:param:bladehomingautocancelenableparam
BladeHomingAutoCancelEnableParam
Fields
| Field | Type | Offset | Description | Notes |
|---|---|---|---|---|
| cancelAngDegR | f32 | 0x0 | Interrupt above the specified right angle. In degrees. | |
| cancelAngDegL | f32 | 0x4 | Interrupt above the specified left angle. In degrees. | |
| cancelAngDegU | f32 | 0x8 | Interrupt above the specified upward angle. In degrees. | |
| cancelAngDegD | f32 | 0xc | Interrupt above the specified downward angle. In degrees. | |
| cancelDist | f32 | 0x10 | Interrupted within this distance. -1 = infinity = no interruption at distance. In metres. | |
| nolockMinTimeSec | f32 | 0x14 | Minimum time without no lock. In seconds. | |
| outTargetDist | f32 | 0x18 | When the target is outside this distance, the behavior is non-locking. -1 always behaves when locked | |
| reserved | dummy8 | 0x1c | This field is padding. |
ac6-refmat/param/bladehomingautocancelenableparam.txt · Last modified: by admin
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
