====== RagdollParam ======
===== Fields =====
^ Field ^ Type ^ Offset ^ Description ^ Notes ^
| enable | ''u8'' | ''0x0'' | If ON, the ragdoll moves during damage. | This field is a boolean. |
| partsHitMaskNo | ''s8'' | ''0x1'' | The parts mask value to use. -1 means mask is disabled. |  |
| pad | ''dummy8'' | ''0x2'' |  | This field is padding. |
| hierarchyGain | ''f32'' | ''0x4'' | Lowering it will bring it closer to the original pose, while increasing it will make it squishier. |  |
| velocityDamping | ''f32'' | ''0x8'' | The rate at which the ragdoll's movement speed is reduced. When it approaches 0, it returns slowly, and when it approaches 1, it returns suddenly. |  |
| accelGain | ''f32'' | ''0xc'' | Adjustment parameter for rigid acceleration. Lower values will make the movement softer, higher values will make it harder. Should be set to a lower value than the acceleration gain. |  |
| velocityGain | ''f32'' | ''0x10'' | Rigid speed adjustment parameter. Lower values will make the movement softer, higher values will make it harder. It seems to be set to a lower value than the speed gain. |  |
| positionGain | ''f32'' | ''0x14'' | Adjustment parameter for rigid movement position. Lower values will make the movement softer, higher values will make it harder. |  |
| maxLinerVelocity | ''f32'' | ''0x18'' | Maximum movement speed for the rigid body. |  |
| maxAngularVelocity | ''f32'' | ''0x1c'' | Maximum rotation speed for the rigid body. |  |
| snapGain | ''f32'' | ''0x20'' | Adjustment value to get closer to the original pose. Effect similar to position gain. |  |
| pad2 | ''dummy8'' | ''0x24'' |  | This field is padding. |