====== RagdollParam ======
===== Fields =====
^ Field ^ Type ^ Offset ^ Description ^ Notes ^
| hierarchyGain | ''f32'' | ''0x0'' | Lowering it will bring it closer to the original pose, while increasing it will make it squishier. |  |
| velocityDamping | ''f32'' | ''0x4'' | The rate at which the ragdoll's movement speed is reduced. When it approaches 0, it returns slowly, and when it approaches 1, it returns suddenly. |  |
| accelGain | ''f32'' | ''0x8'' | Adjustment parameter for rigid acceleration. Lower settings will make the movement softer, higher settings will make it harder. It seems to be set to a lower value than the acceleration gain. |  |
| velocityGain | ''f32'' | ''0xc'' | Rigid speed adjustment parameter. Lower settings will make the movement softer, higher settings will make it harder. It seems to be set to a lower value than the speed gain. |  |
| positionGain | ''f32'' | ''0x10'' | Adjustment parameter for rigid movement position. Lower settings will make the movement softer, higher settings will make it harder. |  |
| maxLinerVelocity | ''f32'' | ''0x14'' | Rigid's maximum movement speed |  |
| maxAngularVelocity | ''f32'' | ''0x18'' | Rigid maximum angular velocity |  |
| snapGain | ''f32'' | ''0x1c'' | Adjustment value to get closer to the original pose. Effect similar to position gain |  |
| enable | ''u8'' | ''0x20'' | Does it move during damage ragdoll? | This field is a boolean. |
| partsHitMaskNo | ''s8'' | ''0x21'' | Mask number per site. -1: Mask disabled |  |
| pad | ''dummy8'' | ''0x22'' |  |  |