====== GarageCameraAnimParam ======
===== Fields =====
^ Field ^ Type ^ Offset ^ Description ^ Notes ^
| disableParam_NT | ''u8'' | ''0x0 [0]'' | Exclude from the NT version or mark the ones to be excluded. | This field is a boolean. |
| disableParam_Product | ''u8'' | ''0x0 [1]'' | Exclude from the product version or mark the items to be excluded. | This field is a boolean. |
| disableParamReserve1 | ''dummy8'' | ''0x0 [2-7]'' |  | This field is padding. |
| disableParamReserve2 | ''dummy8'' | ''0x1'' |  | This field is padding. |
| set00_beginCameraId | ''s16'' | ''0x4'' | Camera ID to play at start. |  |
| set00_endCameraId | ''s16'' | ''0x6'' | Camera ID to play at end. |  |
| set00_bNoWait | ''u8'' | ''0x8 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set00_bFade | ''u8'' | ''0x8 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set00_bBoke | ''u8'' | ''0x8 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set00_bOtherAnimCancel | ''u8'' | ''0x8 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set00_bFilterAnimOnly | ''u8'' | ''0x8 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set00_bCameraHightFixed | ''u8'' | ''0x8 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set00_padbit | ''dummy8'' | ''0x8 [6-7]'' |  | This field is padding. |
| set00_laneCamStartFrame | ''u8'' | ''0x9'' | Initial frame of lane camera animation when switching cameras. |  |
| set00_baseDmyPolyId | ''s16'' | ''0xa'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set00_laneCamLockAtEntityId | ''s8'' | ''0xc'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set00_laneCamPointIdx | ''u8'' | ''0xd'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set00_laneCamLookAtDmyPolyId | ''s16'' | ''0xe'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set01_beginCameraId | ''s16'' | ''0x10'' | Camera ID to play at start. |  |
| set01_endCameraId | ''s16'' | ''0x12'' | Camera ID to play at end. |  |
| set01_bNoWait | ''u8'' | ''0x14 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set01_bFade | ''u8'' | ''0x14 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set01_bBoke | ''u8'' | ''0x14 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set01_bOtherAnimCancel | ''u8'' | ''0x14 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set01_bFilterAnimOnly | ''u8'' | ''0x14 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set01_bCameraHightFixed | ''u8'' | ''0x14 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set01_padbit | ''dummy8'' | ''0x14 [6-7]'' |  | This field is padding. |
| set01_laneCamStartFrame | ''u8'' | ''0x15'' | Initial frame of lane camera animation when switching cameras. |  |
| set01_baseDmyPolyId | ''s16'' | ''0x16'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set01_laneCamLockAtEntityId | ''s8'' | ''0x18'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set01_laneCamPointIdx | ''u8'' | ''0x19'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set01_laneCamLookAtDmyPolyId | ''s16'' | ''0x1a'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set02_beginCameraId | ''s16'' | ''0x1c'' | Camera ID to play at start. |  |
| set02_endCameraId | ''s16'' | ''0x1e'' | Camera ID to play at end. |  |
| set02_bNoWait | ''u8'' | ''0x20 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set02_bFade | ''u8'' | ''0x20 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set02_bBoke | ''u8'' | ''0x20 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set02_bOtherAnimCancel | ''u8'' | ''0x20 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set02_bFilterAnimOnly | ''u8'' | ''0x20 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set02_bCameraHightFixed | ''u8'' | ''0x20 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set02_padbit | ''dummy8'' | ''0x20 [6-7]'' |  | This field is padding. |
| set02_laneCamStartFrame | ''u8'' | ''0x21'' | Initial frame of lane camera animation when switching cameras. |  |
| set02_baseDmyPolyId | ''s16'' | ''0x22'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set02_laneCamLockAtEntityId | ''s8'' | ''0x24'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set02_laneCamPointIdx | ''u8'' | ''0x25'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set02_laneCamLookAtDmyPolyId | ''s16'' | ''0x26'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set03_beginCameraId | ''s16'' | ''0x28'' | Camera ID to play at start. |  |
| set03_endCameraId | ''s16'' | ''0x2a'' | Camera ID to play at end. |  |
| set03_bNoWait | ''u8'' | ''0x2c [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set03_bFade | ''u8'' | ''0x2c [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set03_bBoke | ''u8'' | ''0x2c [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set03_bOtherAnimCancel | ''u8'' | ''0x2c [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set03_bFilterAnimOnly | ''u8'' | ''0x2c [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set03_bCameraHightFixed | ''u8'' | ''0x2c [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set03_padbit | ''dummy8'' | ''0x2c [6-7]'' |  | This field is padding. |
| set03_laneCamStartFrame | ''u8'' | ''0x2d'' | Initial frame of lane camera animation when switching cameras. |  |
| set03_baseDmyPolyId | ''s16'' | ''0x2e'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set03_laneCamLockAtEntityId | ''s8'' | ''0x30'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set03_laneCamPointIdx | ''u8'' | ''0x31'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set03_laneCamLookAtDmyPolyId | ''s16'' | ''0x32'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set04_beginCameraId | ''s16'' | ''0x34'' | Camera ID to play at start. |  |
| set04_endCameraId | ''s16'' | ''0x36'' | Camera ID to play at end. |  |
| set04_bNoWait | ''u8'' | ''0x38 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set04_bFade | ''u8'' | ''0x38 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set04_bBoke | ''u8'' | ''0x38 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set04_bOtherAnimCancel | ''u8'' | ''0x38 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set04_bFilterAnimOnly | ''u8'' | ''0x38 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set04_bCameraHightFixed | ''u8'' | ''0x38 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set04_padbit | ''dummy8'' | ''0x38 [6-7]'' |  | This field is padding. |
| set04_laneCamStartFrame | ''u8'' | ''0x39'' | Initial frame of lane camera animation when switching cameras. |  |
| set04_baseDmyPolyId | ''s16'' | ''0x3a'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set04_laneCamLockAtEntityId | ''s8'' | ''0x3c'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set04_laneCamPointIdx | ''u8'' | ''0x3d'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set04_laneCamLookAtDmyPolyId | ''s16'' | ''0x3e'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set05_beginCameraId | ''s16'' | ''0x40'' | Camera ID to play at start. |  |
| set05_endCameraId | ''s16'' | ''0x42'' | Camera ID to play at end. |  |
| set05_bNoWait | ''u8'' | ''0x44 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set05_bFade | ''u8'' | ''0x44 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set05_bBoke | ''u8'' | ''0x44 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set05_bOtherAnimCancel | ''u8'' | ''0x44 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set05_bFilterAnimOnly | ''u8'' | ''0x44 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set05_bCameraHightFixed | ''u8'' | ''0x44 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set05_padbit | ''dummy8'' | ''0x44 [6-7]'' |  | This field is padding. |
| set05_laneCamStartFrame | ''u8'' | ''0x45'' | Initial frame of lane camera animation when switching cameras. |  |
| set05_baseDmyPolyId | ''s16'' | ''0x46'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set05_laneCamLockAtEntityId | ''s8'' | ''0x48'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set05_laneCamPointIdx | ''u8'' | ''0x49'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set05_laneCamLookAtDmyPolyId | ''s16'' | ''0x4a'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set06_beginCameraId | ''s16'' | ''0x4c'' | Camera ID to play at start. |  |
| set06_endCameraId | ''s16'' | ''0x4e'' | Camera ID to play at end. |  |
| set06_bNoWait | ''u8'' | ''0x50 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set06_bFade | ''u8'' | ''0x50 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set06_bBoke | ''u8'' | ''0x50 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set06_bOtherAnimCancel | ''u8'' | ''0x50 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set06_bFilterAnimOnly | ''u8'' | ''0x50 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set06_bCameraHightFixed | ''u8'' | ''0x50 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set06_padbit | ''dummy8'' | ''0x50 [6-7]'' |  | This field is padding. |
| set06_laneCamStartFrame | ''u8'' | ''0x51'' | Initial frame of lane camera animation when switching cameras. |  |
| set06_baseDmyPolyId | ''s16'' | ''0x52'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set06_laneCamLockAtEntityId | ''s8'' | ''0x54'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set06_laneCamPointIdx | ''u8'' | ''0x55'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set06_laneCamLookAtDmyPolyId | ''s16'' | ''0x56'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set07_beginCameraId | ''s16'' | ''0x58'' | Camera ID to play at start. |  |
| set07_endCameraId | ''s16'' | ''0x5a'' | Camera ID to play at end. |  |
| set07_bNoWait | ''u8'' | ''0x5c [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set07_bFade | ''u8'' | ''0x5c [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set07_bBoke | ''u8'' | ''0x5c [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set07_bOtherAnimCancel | ''u8'' | ''0x5c [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set07_bFilterAnimOnly | ''u8'' | ''0x5c [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set07_bCameraHightFixed | ''u8'' | ''0x5c [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set07_padbit | ''dummy8'' | ''0x5c [6-7]'' |  | This field is padding. |
| set07_laneCamStartFrame | ''u8'' | ''0x5d'' | Initial frame of lane camera animation when switching cameras. |  |
| set07_baseDmyPolyId | ''s16'' | ''0x5e'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set07_laneCamLockAtEntityId | ''s8'' | ''0x60'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set07_laneCamPointIdx | ''u8'' | ''0x61'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set07_laneCamLookAtDmyPolyId | ''s16'' | ''0x62'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set08_beginCameraId | ''s16'' | ''0x64'' | Camera ID to play at start. |  |
| set08_endCameraId | ''s16'' | ''0x66'' | Camera ID to play at end. |  |
| set08_bNoWait | ''u8'' | ''0x68 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set08_bFade | ''u8'' | ''0x68 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set08_bBoke | ''u8'' | ''0x68 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set08_bOtherAnimCancel | ''u8'' | ''0x68 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set08_bFilterAnimOnly | ''u8'' | ''0x68 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set08_bCameraHightFixed | ''u8'' | ''0x68 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set08_padbit | ''dummy8'' | ''0x68 [6-7]'' |  | This field is padding. |
| set08_laneCamStartFrame | ''u8'' | ''0x69'' | Initial frame of lane camera animation when switching cameras. |  |
| set08_baseDmyPolyId | ''s16'' | ''0x6a'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set08_laneCamLockAtEntityId | ''s8'' | ''0x6c'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set08_laneCamPointIdx | ''u8'' | ''0x6d'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set08_laneCamLookAtDmyPolyId | ''s16'' | ''0x6e'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set09_beginCameraId | ''s16'' | ''0x70'' | Camera ID to play at start. |  |
| set09_endCameraId | ''s16'' | ''0x72'' | Camera ID to play at end. |  |
| set09_bNoWait | ''u8'' | ''0x74 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set09_bFade | ''u8'' | ''0x74 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set09_bBoke | ''u8'' | ''0x74 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set09_bOtherAnimCancel | ''u8'' | ''0x74 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set09_bFilterAnimOnly | ''u8'' | ''0x74 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set09_bCameraHightFixed | ''u8'' | ''0x74 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set09_padbit | ''dummy8'' | ''0x74 [6-7]'' |  | This field is padding. |
| set09_laneCamStartFrame | ''u8'' | ''0x75'' | Initial frame of lane camera animation when switching cameras. |  |
| set09_baseDmyPolyId | ''s16'' | ''0x76'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set09_laneCamLockAtEntityId | ''s8'' | ''0x78'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set09_laneCamPointIdx | ''u8'' | ''0x79'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set09_laneCamLookAtDmyPolyId | ''s16'' | ''0x7a'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set10_beginCameraId | ''s16'' | ''0x7c'' | Camera ID to play at start. |  |
| set10_endCameraId | ''s16'' | ''0x7e'' | Camera ID to play at end. |  |
| set10_bNoWait | ''u8'' | ''0x80 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set10_bFade | ''u8'' | ''0x80 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set10_bBoke | ''u8'' | ''0x80 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set10_bOtherAnimCancel | ''u8'' | ''0x80 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set10_bFilterAnimOnly | ''u8'' | ''0x80 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set10_bCameraHightFixed | ''u8'' | ''0x80 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set10_padbit | ''dummy8'' | ''0x80 [6-7]'' |  | This field is padding. |
| set10_laneCamStartFrame | ''u8'' | ''0x81'' | Initial frame of lane camera animation when switching cameras. |  |
| set10_baseDmyPolyId | ''s16'' | ''0x82'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set10_laneCamLockAtEntityId | ''s8'' | ''0x84'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set10_laneCamPointIdx | ''u8'' | ''0x85'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set10_laneCamLookAtDmyPolyId | ''s16'' | ''0x86'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set11_beginCameraId | ''s16'' | ''0x88'' | Camera ID to play at start. |  |
| set11_endCameraId | ''s16'' | ''0x8a'' | Camera ID to play at end. |  |
| set11_bNoWait | ''u8'' | ''0x8c [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set11_bFade | ''u8'' | ''0x8c [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set11_bBoke | ''u8'' | ''0x8c [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set11_bOtherAnimCancel | ''u8'' | ''0x8c [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set11_bFilterAnimOnly | ''u8'' | ''0x8c [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set11_bCameraHightFixed | ''u8'' | ''0x8c [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set11_padbit | ''dummy8'' | ''0x8c [6-7]'' |  | This field is padding. |
| set11_laneCamStartFrame | ''u8'' | ''0x8d'' | Initial frame of lane camera animation when switching cameras. |  |
| set11_baseDmyPolyId | ''s16'' | ''0x8e'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set11_laneCamLockAtEntityId | ''s8'' | ''0x90'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set11_laneCamPointIdx | ''u8'' | ''0x91'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set11_laneCamLookAtDmyPolyId | ''s16'' | ''0x92'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set12_beginCameraId | ''s16'' | ''0x94'' | Camera ID to play at start. |  |
| set12_endCameraId | ''s16'' | ''0x96'' | Camera ID to play at end. |  |
| set12_bNoWait | ''u8'' | ''0x98 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set12_bFade | ''u8'' | ''0x98 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set12_bBoke | ''u8'' | ''0x98 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set12_bOtherAnimCancel | ''u8'' | ''0x98 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set12_bFilterAnimOnly | ''u8'' | ''0x98 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set12_bCameraHightFixed | ''u8'' | ''0x98 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set12_padbit | ''dummy8'' | ''0x98 [6-7]'' |  | This field is padding. |
| set12_laneCamStartFrame | ''u8'' | ''0x99'' | Initial frame of lane camera animation when switching cameras. |  |
| set12_baseDmyPolyId | ''s16'' | ''0x9a'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set12_laneCamLockAtEntityId | ''s8'' | ''0x9c'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set12_laneCamPointIdx | ''u8'' | ''0x9d'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set12_laneCamLookAtDmyPolyId | ''s16'' | ''0x9e'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set13_beginCameraId | ''s16'' | ''0xa0'' | Camera ID to play at start. |  |
| set13_endCameraId | ''s16'' | ''0xa2'' | Camera ID to play at end. |  |
| set13_bNoWait | ''u8'' | ''0xa4 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set13_bFade | ''u8'' | ''0xa4 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set13_bBoke | ''u8'' | ''0xa4 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set13_bOtherAnimCancel | ''u8'' | ''0xa4 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set13_bFilterAnimOnly | ''u8'' | ''0xa4 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set13_bCameraHightFixed | ''u8'' | ''0xa4 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set13_padbit | ''dummy8'' | ''0xa4 [6-7]'' |  | This field is padding. |
| set13_laneCamStartFrame | ''u8'' | ''0xa5'' | Initial frame of lane camera animation when switching cameras. |  |
| set13_baseDmyPolyId | ''s16'' | ''0xa6'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set13_laneCamLockAtEntityId | ''s8'' | ''0xa8'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set13_laneCamPointIdx | ''u8'' | ''0xa9'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set13_laneCamLookAtDmyPolyId | ''s16'' | ''0xaa'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set14_beginCameraId | ''s16'' | ''0xac'' | Camera ID to play at start. |  |
| set14_endCameraId | ''s16'' | ''0xae'' | Camera ID to play at end. |  |
| set14_bNoWait | ''u8'' | ''0xb0 [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set14_bFade | ''u8'' | ''0xb0 [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set14_bBoke | ''u8'' | ''0xb0 [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set14_bOtherAnimCancel | ''u8'' | ''0xb0 [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set14_bFilterAnimOnly | ''u8'' | ''0xb0 [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set14_bCameraHightFixed | ''u8'' | ''0xb0 [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set14_padbit | ''dummy8'' | ''0xb0 [6-7]'' |  | This field is padding. |
| set14_laneCamStartFrame | ''u8'' | ''0xb1'' | Initial frame of lane camera animation when switching cameras. |  |
| set14_baseDmyPolyId | ''s16'' | ''0xb2'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set14_laneCamLockAtEntityId | ''s8'' | ''0xb4'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set14_laneCamPointIdx | ''u8'' | ''0xb5'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set14_laneCamLookAtDmyPolyId | ''s16'' | ''0xb6'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |
| set15_beginCameraId | ''s16'' | ''0xb8'' | Camera ID to play at start. |  |
| set15_endCameraId | ''s16'' | ''0xba'' | Camera ID to play at end. |  |
| set15_bNoWait | ''u8'' | ''0xbc [0]'' | Play now or wait for system wait time if not play. | This field is a boolean. |
| set15_bFade | ''u8'' | ''0xbc [1]'' | Fade in and fade out according to the camera animation (if there is no animation, the system will process at a fixed time) | This field is a boolean. |
| set15_bBoke | ''u8'' | ''0xbc [2]'' | Blur according to the camera animation (if there is no animation, process at a fixed system time) | This field is a boolean. |
| set15_bOtherAnimCancel | ''u8'' | ''0xbc [3]'' | Do you want to cancel the end playback of this camera before starting playback? | This field is a boolean. |
| set15_bFilterAnimOnly | ''u8'' | ''0xbc [4]'' | Only the screen effect animation and the camera animation refer only to the animation frame. | This field is a boolean. |
| set15_bCameraHightFixed | ''u8'' | ''0xbc [5]'' | Even if the height of the viewpoint dummy poly is moved during animation, it will be the difference from the reference height. | This field is a boolean. |
| set15_padbit | ''dummy8'' | ''0xbc [6-7]'' |  | This field is padding. |
| set15_laneCamStartFrame | ''u8'' | ''0xbd'' | Initial frame of lane camera animation when switching cameras. |  |
| set15_baseDmyPolyId | ''s16'' | ''0xbe'' | Play the camera based on the specified dummy polygon (i.e. playback position offset). |  |
| set15_laneCamLockAtEntityId | ''s8'' | ''0xc0'' | If the lane camera viewpoint entity ID (value of the last two digits of 101700) is -1, it is the own aircraft. |  |
| set15_laneCamPointIdx | ''u8'' | ''0xc1'' | Entity ID referenced by the lane camera point region (value of the last digit of 101600). |  |
| set15_laneCamLookAtDmyPolyId | ''s16'' | ''0xc2'' | Damipoly ID from the lane camera viewpoint (if -1, damipoly 899 of your own aircraft's head part) |  |