====== ENAutoRecoveryControlParam ======
===== Fields =====
^ Field ^ Type ^ Offset ^ Description ^ Notes ^
| entry000_ENRecoveryRate | ''u32'' | ''0x0'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry000_ENMax | ''u8'' | ''0x4'' | Specify the maximum energy percentage |  |
| entry000_ENMin | ''s8'' | ''0x5'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry000_DoDelayENRecovery | ''u8'' | ''0x6 [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry000_pad1 | ''dummy8'' | ''0x6 [1-7]'' |  | This field is padding. |
| entry000_pad | ''dummy8'' | ''0x7'' |  | This field is padding. |
| entry001_ENRecoveryRate | ''u32'' | ''0x8'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry001_ENMax | ''u8'' | ''0xc'' | Specify the maximum energy percentage |  |
| entry001_ENMin | ''s8'' | ''0xd'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry001_DoDelayENRecovery | ''u8'' | ''0xe [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry001_pad1 | ''dummy8'' | ''0xe [1-7]'' |  | This field is padding. |
| entry001_pad | ''dummy8'' | ''0xf'' |  | This field is padding. |
| entry002_ENRecoveryRate | ''u32'' | ''0x10'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry002_ENMax | ''u8'' | ''0x14'' | Specify the maximum energy percentage |  |
| entry002_ENMin | ''s8'' | ''0x15'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry002_DoDelayENRecovery | ''u8'' | ''0x16 [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry002_pad1 | ''dummy8'' | ''0x16 [1-7]'' |  | This field is padding. |
| entry002_pad | ''dummy8'' | ''0x17'' |  | This field is padding. |
| entry003_ENRecoveryRate | ''u32'' | ''0x18'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry003_ENMax | ''u8'' | ''0x1c'' | Specify the maximum energy percentage |  |
| entry003_ENMin | ''s8'' | ''0x1d'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry003_DoDelayENRecovery | ''u8'' | ''0x1e [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry003_pad1 | ''dummy8'' | ''0x1e [1-7]'' |  | This field is padding. |
| entry003_pad | ''dummy8'' | ''0x1f'' |  | This field is padding. |
| entry004_ENRecoveryRate | ''u32'' | ''0x20'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry004_ENMax | ''u8'' | ''0x24'' | Specify the maximum energy percentage |  |
| entry004_ENMin | ''s8'' | ''0x25'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry004_DoDelayENRecovery | ''u8'' | ''0x26 [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry004_pad1 | ''dummy8'' | ''0x26 [1-7]'' |  | This field is padding. |
| entry004_pad | ''dummy8'' | ''0x27'' |  | This field is padding. |
| entry005_ENRecoveryRate | ''u32'' | ''0x28'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry005_ENMax | ''u8'' | ''0x2c'' | Specify the maximum energy percentage |  |
| entry005_ENMin | ''s8'' | ''0x2d'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry005_DoDelayENRecovery | ''u8'' | ''0x2e [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry005_pad1 | ''dummy8'' | ''0x2e [1-7]'' |  | This field is padding. |
| entry005_pad | ''dummy8'' | ''0x2f'' |  | This field is padding. |
| entry006_ENRecoveryRate | ''u32'' | ''0x30'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry006_ENMax | ''u8'' | ''0x34'' | Specify the maximum energy percentage |  |
| entry006_ENMin | ''s8'' | ''0x35'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry006_DoDelayENRecovery | ''u8'' | ''0x36 [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry006_pad1 | ''dummy8'' | ''0x36 [1-7]'' |  | This field is padding. |
| entry006_pad | ''dummy8'' | ''0x37'' |  | This field is padding. |
| entry007_ENRecoveryRate | ''u32'' | ''0x38'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry007_ENMax | ''u8'' | ''0x3c'' | Specify the maximum energy percentage |  |
| entry007_ENMin | ''s8'' | ''0x3d'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry007_DoDelayENRecovery | ''u8'' | ''0x3e [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry007_pad1 | ''dummy8'' | ''0x3e [1-7]'' |  | This field is padding. |
| entry007_pad | ''dummy8'' | ''0x3f'' |  | This field is padding. |
| entry008_ENRecoveryRate | ''u32'' | ''0x40'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry008_ENMax | ''u8'' | ''0x44'' | Specify the maximum energy percentage |  |
| entry008_ENMin | ''s8'' | ''0x45'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry008_DoDelayENRecovery | ''u8'' | ''0x46 [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry008_pad1 | ''dummy8'' | ''0x46 [1-7]'' |  | This field is padding. |
| entry008_pad | ''dummy8'' | ''0x47'' |  | This field is padding. |
| entry009_ENRecoveryRate | ''u32'' | ''0x48'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry009_ENMax | ''u8'' | ''0x4c'' | Specify the maximum energy percentage |  |
| entry009_ENMin | ''s8'' | ''0x4d'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry009_DoDelayENRecovery | ''u8'' | ''0x4e [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry009_pad1 | ''dummy8'' | ''0x4e [1-7]'' |  | This field is padding. |
| entry009_pad | ''dummy8'' | ''0x4f'' |  | This field is padding. |
| entry010_ENRecoveryRate | ''u32'' | ''0x50'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry010_ENMax | ''u8'' | ''0x54'' | Specify the maximum energy percentage |  |
| entry010_ENMin | ''s8'' | ''0x55'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry010_DoDelayENRecovery | ''u8'' | ''0x56 [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry010_pad1 | ''dummy8'' | ''0x56 [1-7]'' |  | This field is padding. |
| entry010_pad | ''dummy8'' | ''0x57'' |  | This field is padding. |
| entry011_ENRecoveryRate | ''u32'' | ''0x58'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry011_ENMax | ''u8'' | ''0x5c'' | Specify the maximum energy percentage |  |
| entry011_ENMin | ''s8'' | ''0x5d'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry011_DoDelayENRecovery | ''u8'' | ''0x5e [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry011_pad1 | ''dummy8'' | ''0x5e [1-7]'' |  | This field is padding. |
| entry011_pad | ''dummy8'' | ''0x5f'' |  | This field is padding. |
| entry012_ENRecoveryRate | ''u32'' | ''0x60'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry012_ENMax | ''u8'' | ''0x64'' | Specify the maximum energy percentage |  |
| entry012_ENMin | ''s8'' | ''0x65'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry012_DoDelayENRecovery | ''u8'' | ''0x66 [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry012_pad1 | ''dummy8'' | ''0x66 [1-7]'' |  | This field is padding. |
| entry012_pad | ''dummy8'' | ''0x67'' |  | This field is padding. |
| entry013_ENRecoveryRate | ''u32'' | ''0x68'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry013_ENMax | ''u8'' | ''0x6c'' | Specify the maximum energy percentage |  |
| entry013_ENMin | ''s8'' | ''0x6d'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry013_DoDelayENRecovery | ''u8'' | ''0x6e [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry013_pad1 | ''dummy8'' | ''0x6e [1-7]'' |  | This field is padding. |
| entry013_pad | ''dummy8'' | ''0x6f'' |  | This field is padding. |
| entry014_ENRecoveryRate | ''u32'' | ''0x70'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry014_ENMax | ''u8'' | ''0x74'' | Specify the maximum energy percentage |  |
| entry014_ENMin | ''s8'' | ''0x75'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry014_DoDelayENRecovery | ''u8'' | ''0x76 [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry014_pad1 | ''dummy8'' | ''0x76 [1-7]'' |  | This field is padding. |
| entry014_pad | ''dummy8'' | ''0x77'' |  | This field is padding. |
| entry015_ENRecoveryRate | ''u32'' | ''0x78'' | Change the energy recovery rate by energy recovery speed x energy recovery rate x 0.01 |  |
| entry015_ENMax | ''u8'' | ''0x7c'' | Specify the maximum energy percentage |  |
| entry015_ENMin | ''s8'' | ''0x7d'' | Specify the lower limit percentage of energy. If -1, use the system-prepared energy debt value. |  |
| entry015_DoDelayENRecovery | ''u8'' | ''0x7e [0]'' | If enabled, energy recovery delay is applied. | This field is a boolean. |
| entry015_pad1 | ''dummy8'' | ''0x7e [1-7]'' |  | This field is padding. |
| entry015_pad | ''dummy8'' | ''0x7f'' |  | This field is padding. |
| pad_end | ''dummy8'' | ''0x80'' |  | This field is padding. |