====== BladeHomingAutoCancelEnableParam ======
===== Fields =====
^ Field ^ Type ^ Offset ^ Description ^ Notes ^
| cancelAngDegR | ''f32'' | ''0x0'' | Interrupt above the specified right angle. In degrees. |  |
| cancelAngDegL | ''f32'' | ''0x4'' | Interrupt above the specified left angle. In degrees. |  |
| cancelAngDegU | ''f32'' | ''0x8'' | Interrupt above the specified upward angle. In degrees. |  |
| cancelAngDegD | ''f32'' | ''0xc'' | Interrupt above the specified downward angle. In degrees. |  |
| cancelDist | ''f32'' | ''0x10'' | Interrupted within this distance. -1 = infinity = no interruption at distance. In metres. |  |
| nolockMinTimeSec | ''f32'' | ''0x14'' | Minimum time without no lock. In seconds. |  |
| outTargetDist | ''f32'' | ''0x18'' | When the target is outside this distance, the behavior is non-locking. -1 always behaves when locked |  |
| reserved | ''dummy8'' | ''0x1c'' |  | This field is padding. |